Nov 17 2026

/

What Is 1.2738 Steel? A Guide to DIN 1.2738 Plastic Mold Steel

What Is 1.2738 Steel? A Guide to DIN 1.2738 Plastic Mold Steel

When buyers look for a reliable pre-hardened steel for large plastic molds, 1.2738 is one of the grades they encounter most often. This guide explains what 1.2738 steel is, how its equivalent grades match, what properties it offers and its typical applications.

1. What Is 1.2738 Steel?

1.2738 is a pre-hardened, nickel-alloyed plastic mold steel supplied to the DIN standard. It is a modified 1.2311 grade: nickel, at about 0.90–1.20%, is added to the standard 1.2311 composition to improve through-hardenability, hardness uniformity in large sections, toughness, and polishability. Because it arrives pre-hardened, molds can be machined directly without a subsequent hardening heat treatment, which helps avoid distortion after machining.

1.2738 plastic mold steel

2.Equivalent grades

Standard systemEquivalent grade
DIN1.2738
AISIP20+Ni
GB3Cr2NiMnMo
JISNASKS5
ASSAB718

3. Key Properties

(1) Nickel addition and large-section performance

Compared with standard 1.2311, the higher nickel content in 1.2738 significantly improves hardenability, producing more uniform hardening from core to surface in thick-section mould blocks, so hardness and machinability stay consistent across large cross-sections. This is especially critical for acid etching: uneven hardness leads to uneven etch depth and patchy, blotchy patterns during chemical etching, whereas 1.2738’s uniform matrix hardness and clean, homogeneous microstructure deliver a fine, sharply defined texture of consistent depth — reproducibly, both across the multiple cavities of one mould and across repeated etching cycles, with no pinholes, local over-etching or blurred texture. The grade also combines good toughness, ductility, machinability and polishability, and can be finished to standard mould surface quality, providing a uniform starting surface for subsequent polishing and texturing.

(2) Pre-hardened delivery condition

The standard delivery condition is pre-hardened, typically 33–37 HRC . A higher-hardness variant, often referenced as the 738HH / P40 class, is available at 38–42 HRC.

4. Typical Applications

1.2738 is widely used for medium and large plastic molds, including:

Large injection molds and mold bases

Automotive plastic parts such as bumpers and exterior trim

Household appliance housings

General-purpose plastic molds where a good surface finish is required

5. Chemical Composition

ElementCSiMnPSCrMoNi
Content (%)0.35–0.450.2–0.41.3–1.6≤0.03≤0.031.8–2.10.15–0.250.9–1.2

For more information, or to get the best price for the products you need, please contact us.