Nov 05 2026
/
Something about 1.2312 you need to know.
What Is 1.2312 Steel?
If you see “1.2312” on a customer’s inquiry and only know P20, you’re not alone. It’s P20 with sulfur added—built to machine faster. Here’s what you actually need to know, whether you’re selecting material for a mold or sourcing it from China.
1.2312 is a pre-hardened plastic mold steel, designated 3Cr2Mo+S, commonly associated with the AISI-style designation P20+S.
The defining feature of 1.2312 is its intentional sulfur addition. Sulfur improves machinability and chip breaking compared with conventional 1.2311 (P20), making 1.2312 particularly useful for mold bases, support plates, and other components that require extensive CNC machining.
Chemical Composition of 1.2312
| Element | Typical Specification (%) |
|---|---|
| Carbon (C) | 0.35–0.45 |
| Silicon (Si) | 0.30–0.50 |
| Manganese (Mn) | 1.40–1.60 |
| Phosphorus (P) | ≤ 0.030 |
| Sulfur (S) | 0.05–0.10 |
| Chromium (Cr) | 1.80–2.00 |
| Molybdenum (Mo) | 0.15–0.25 |
1.2312 vs 1.2311 vs 1.2738: What’s the Difference?
| Property | 1.2312 (P20+S) | 1.2311 (P20) | 1.2738 (P20+Ni) |
|---|---|---|---|
| Main alloy feature | Increased sulfur | Conventional P20 | Nickel addition |
| Delivery condition | Pre-hardened | Pre-hardened | Pre-hardened |
| Machinability | Very good | Good | Good |
| Polishability | Limited by sulfur content | Good | Good to very good |
| Weldability | Requires careful procedure | Requires careful procedure | Requires careful procedure |
| Main advantage | Faster machining | Balanced all-around | Through-section uniformity |
| Best for | Mold bases, internal components | General plastic molds | Larger molds |
In plain terms:
1.2311 (P20) is the balanced default. Good machining, good polish, good weldability. It’s what most general plastic molds run on.
1.2312 (P20+S) is the machining specialist. The extra sulfur means better chip breaking and shorter CNC cycle times. But that same sulfur limits how well it polishes and makes welding trickier. Use it for mold bases and internal parts—not for visible, polished surfaces.
1.2738 (P20+Ni) is the big-section specialist. Nickel improves hardenability, so properties stay uniform through larger cross-sections. It’s the go-to for larger injection molds where 1.2311 might have soft spots in the middle.
Where Is 1.2312 Used?
1.2312 excels when machining volume is high and mirror polish is not required. Typical applications include:
- Plastic injection mold bases
- Mold frames and support plates
- Internal mold components
- Appliance housings and internal plastic parts
- Packaging mold components
- Industrial mold tooling
When to choose 1.2312:
- Your parts need extensive CNC machining
- You want better chip breaking than standard 1.2311
- The mold surface doesn’t need mirror polish
- You want pre-hardened material ready to machine
What to Check When Ordering 1.2312
When you source 1.2312 from China, don’t just say “send me 1.2312.” Ask for:
- EN 10204 3.1 MTC — confirming grade, heat number, and actual sulfur content. The sulfur number is what makes 1.2312 work; if it’s too low, you’re basically paying extra for standard P20.
- Pre-hardened delivery condition — typically 280–325 HB. Confirm the hardness range you need before ordering.
- Dimensions and surface condition — specify thickness, width, length, and whether you want black, sawn, milled, or ground material.
- Ultrasonic testing — for large blocks or critical molds, request UT per an agreed acceptance standard.
- Heat number traceability — the material marking on the steel should match the MTC. If it doesn’t, you don’t know what you’re buying.
1.2311 or 1.2312? The One Question That Decides It
When customers ask us “should I order 1.2311 or 1.2312?”, we ask one thing back: how much CNC machining are you doing, and does the surface need to polish?
- General-purpose mold, decent polish needed → 1.2311
- Heavy machining, internal components, polish not critical → 1.2312
- Large mold, need uniform properties through thick sections → 1.2738
There’s no universally best grade. The right choice depends on the application.
Sourcing 1.2312 from China?
If you’re sourcing DIN 1.2312 from China, you need a supplier who can provide traceable material, consistent quality, and the dimensions you actually need—not just a cheaper price per kilo.
Send us your required dimensions, quantity, hardness, and surface condition. We’ll tell you which grade and section make sense for your project—the right option, not the most expensive one.